Step 5: Preparing The Remote - Sony BDP-S1 Operating Instructions Manual

_/ OIUSOt book Page t8 Tuesday,_S-l_b_,_{q\iS!3_:_'B_OS BDP.S 1\1024\2687794111 BDP-S1 (US) 1006\2687794111 BDPSI\01US05GET.fmmaster:Left
If you want to control your TV with the
supplied remote
You call control the volmne, input source, and power switch of
your Sony TV with the supplied remote.
,_o
TV I/(_
Number
buttons
A %1 T<_
VOL +/-
-- TV/VlDEO
CH +/-
By pressing You can
TV I/(_) Turn the TV on or oft.
VOL +/ At[just the volume of the TV.
TV/VIDEO Switch the TV's input source
between the TV and other input
sources.
CH +_ Select the channel up and down.
MUTING Mute the sound (lor Sony TV only).
To controlotherTVs with the remote
You can control tile vohlme, input source, and pow'er switch of non-
Sony TVs as well.
If your TV is listed in the table below, set the appropriate
nlanu facturer's code.
1
While holding down TV I/V, press the number
buttons to select your TV's manufacturer's code
(see the table below).
2 Release TV I/_).
• ,Code numbers of controllable TVs
If more than one code number is listed, try entering them one at
a time until you find the one that works with your TV.
Manufacturer Code number
Sony 01 (default)
Daewoo 22.04
Emerson 14
GE 06
Hitachi 1)2, 04
JVC 09
LG/Gold star 03,17, 04
MGA/Mitsubishi 13. (_
NEC 04.12
Panasonic 19
Philips I)8.21
Pioneer 16
RCA I0. 04
R.Shack 05
Samsung 04.12.21)
Sanyo II
Sharp 05, 18
Toshiba 07. 18
Zenith 15
• ,To return the remote to its defaultsettings
1
Remove the batteries from the remote.
2 Re-insert the batteries while pressing down 1, 2,
and 3 of the number buttons.
3 Wait for a few seconds.
Dependir_g on the connected mill, you may not be able to conlrol your
TV using all or some ol file buttons on Ihe supplied remole.
8 Step 5: Preparing the Remote
BDP-S1 (US)
2-687-794-11 (1)