H3C S3100-52P Operation Manual page 12

Operation Manual – Port Basic Configuration
H3C S3100-52P Ethernet Switch
Caution:
The port state change delay takes effect when the port goes down but not when the
port goes up.
Follow these steps to set the port state change delay:
To do ...
Enter system view
Enter Ethernet
interface view
Set the port state
change delay
Note:
The delay configured in this way does not take effect for ports in DLDP down state. For
information about the DLDP down state, refer to DLDP.
Use the command ...
system-view
interface interface-type
interface-number
link-delay delay-time
1-11
Chapter 1 Port Basic Configuration
Remarks
—
—
Required
Defaults to 0, which indicates
the port state changes without
any delay.