Husqvarna LC 247iX Operator's Manual page 12

Always walk when you operate
the product.
• Stop the motor before you
change the cutting height.
Never make adjustments with
the motor started.
• Never let the product stay out
of view with the motor started.
Stop the motor and make sure
that the cutting equipment
does not rotate.
Safety instructions for operation
Personal protective
equipment
WARNING: Read the
warning instructions that
follow before you use the
product.
• Personal protective equipment
cannot fully prevent injury but
it decreases the degree of
injury if an accident does
occur. Let your dealer help
you select the right equipment.
• Use heavy-duty slip-resistant
boots or shoes. Do not use
open shoes or go with bare
feet.
• Use heavy, long pants.
• Use protective gloves when
necessary, for example when
you attach, examine or clean
the cutting equipment.
12
Safety devices on the product
WARNING: Read the
warning instructions that
follow before you use the
product.
• Do not use a product with
defective safety devices.
• Do a check of the safety
devices regularly. If the safety
devices are defective, speak
to your Husqvarna service
agent.
To do a check of the cutting
cover
The cutting cover decreases
vibrations in the product and
decreases the risk of injury from
the blade.
• Examine the cutting cover to
make sure that there are no
damages such as cracks.
Safety key
The safety key is below the
battery lid. The safety key
connects the battery that
supplies the motor with power.
• Start and stop the motor to do
a check of the safety key.
• If the safety key operates
correctly, the motor can only
start when the safety key is in
position 1.
890 - 002 - 21.12.2018