2.1.2
Tools
The following are the tools required in the setup procedure. Before starting, make sure you have the
following tools required to set up the system.
General tools
• Allen wrench (mm, inch)
• Phillips screwdriver
• Fluorescent slide specimen (you can also use an HE-stained specimen)
Special tools
• Laser-protection goggles
Figure 2.1-1
• Power measurement attachment
Figure 2.1-3
• Coupler-centering tool
Figure 2.1-5
• Nikon 2-piece M4 screwdriver set
(with red handles)
Figure 2.1-7
• AOTF driver remote controller (for maintenance)
Figure 2.1-9
Chapter 2 Preparations
2.1 Check Items and Tools
• Calibrated power meter
• Dichroic mirror centering tool
• Centering tool for visual observations and mirror for
observing centering tool
• Polarization orientation adjustment tool and
polarizer-equipped tool
• Centering tool (left: for LU4A)
* Two pieces of a type are required.
1-68
Figure 2.1-2
Figure 2.1-4
Figure 2.1-6
Figure 2.1-8
Figure 2.1-10