Photo Activation Illuminator Unit - Nikon Eclipse TI-TIRF-E Setup Manual

8.1.3

Photo Activation Illuminator Unit

Unit
Ti
Objective
Shutter unit
AC adapter
Microscope and
accessories
Epi-fl filter turret
Epi illumination lamp
and power supply
device
Stage ring
(concentric ring)
Stage up kit
Back port unit
Photo Activation
Photo Activation
Illuminator Unit
Illuminator Unit
Optical fiber
PC
PA-GFP image Monitor
observation devices
TV camera (video
camera)
Two-laser unit
Three-laser unit
Laser unit
Three-laser unit EX
Four-laser module A
Filter slider cover
Filter cube port cover
retaining plate
Ti laser safety kit
Safety label
Protection plate for
nosepiece
Chapter 8 Specifications and Performance
8.1 Overall Configuration
Table 8.1-3
Device Model name
Ti-E
Ti-E/B
Ti-U
Ti-U/B
TI-LUSU
TI-LU4SU
AD-1260B
EA1050E-120
TI-FLC
TI-FLC-E
TI-FLC-E/HQ
26
32
TI-BSUK70
TI-BPU
TI-PAU
C1 single mode fiber
Commercially available
Commercially available
Commercially available
C-LU2
C-LU3
C-LU3EX
LU4A
1-234
Remarks
Use the TI-DH Dia Pillar Illuminator
100W.
Use objectives appropriate for
specimens.
The unit can be connected to a PC.
For TI-LUSU shutter unit
Make sure to read the instruction
manuals for the products.
Model 32 is made of glass.
TI-BSUK70 70 mm stage up kit is
required.
Illumination for PA-GFP or Epi
An optical path selector mirror is
required.
An adapter is required to connect to the
microscope port.
See Section 8.1.4 for mountable lasers.
See Section 8.1.4 for mountable lasers.
See Section 8.1.4 for mountable lasers.
Included accessory
• Ar wavelength selector (C1-EX)