5.3.8
Attaching the Sheet Metal Cover
Figure 5.3-79
Harness bands
Figure 5.3-80
Figure 5.3-81
Figure 5.3-82
This completes the laser adjustment.
Chapter 5 Laser Unit
5.3 C-LU3EX Three-laser Unit EX
1.
Attach four harness bands to the laser unit mount.
2.
Secure the cables and fibers with harness bands.
3.
Attach the sheet metal cover using the six screws.
4.
Align the knob with the control range indicator for the
light control knob.
5.
Affix the label provided corresponding to the laser
wavelength used.
1-155