Firmware; Firmware And Configuration; Firmware Update; Performing The Firmware Update - Bosch DDU 7 Manual

Display Unit DDU 7
15

Firmware

15.1

Firmware and configuration

DDU 7 holds 4 types of data:
Firmware: the software (PST program file) of the DDU 7.
Configuration: the configuration of Input channels, CAN I/O, PWM, display configuration,
recording + telemetry configuration.
Calibration data: Characteristic curves and offsets created by online calibration at the vehicle.
Recorded data: Measurement data recorded during vehicle operation.
15.2

Firmware update

The scheme shows the process during each connection between RaceCon and DDU 7.
15.2.1

Performing the firmware update

Firmware update is only possible if the DDU 7 is connected to RaceCon.
The configuration of Input channels, CAN I/O, display, recording + telemetry will not be
changed.
Bosch Motorsport
RaceCon
Firmware version
consistency check
Version match
Firmware check
successful
DDU 8
Version does not match
Change program
archive in RaceCon
Manual
Firmware | en 137
Update firmware
04.02.2019 | V 02 |