Upgrading Mcemonitor - NEC Express5800/A1040b User Manual

3.2.3

Upgrading mcemonitor

1. Login to the target machine as a root user.
2. Confirm that the current version of mcemonitor RPM package of Machine Check Monitoring
Service is older than that of mcemonitor RPM package you are going to upgrade.
# rpm -qa | grep mcemonitor
mcl-mcemonitor1-2.4-2.02.el6.x86_64
3. Copy RPM to desired directory in target machine.
The most recent version of RPM is available for download from the following website.
http://www.58support.nec.co.jp/global/download/index.html
4. Upgrade mcemonitor RPM package of Machine Check Monitoring Service using rpm
command.
# rpm -Uvh mcl-mcemonitor1-2.4-2.03.el6.x86_64.rpm
Preparing...
4083 /opt/nec/mcemonitor/mcemonitor
Stopping mcemonitor[ OK ]
1: mcl-mcemonitor1 ######################################### [100%]
Starting mcemonitor daemon[ OK ]
If mcemonitor.conf was changed, the following message will be displayed. The message can
be safely ignored because your configuration of the mcemonitor.conf is preserved.
mcemonitor.conf.rpmnew is the default mcemonitor.conf file.
warning: /opt/nec/mcemonitor/conf/mcemonitor.conf created as
/opt/nec/mcemonitor/conf/mcemonitor.conf.rpmnew
5. Confirm that mcemonitor RPM package of Machine Check Monitoring Service is upgraded
correctly. The following is displayed when upgrade completes successfully.
# rpm -qa | grep mcemonitor
mcl-mcemonitor1-2.4-2.03.el6.x86_64
6. Check if mcemonitor is started normally. If the following is displayed, mcemonitor is started
normally.
# ps aux | grep monitor
root 4189 0.0 0.0 4076 364 ? Ss 13:56 0:00 /opt/nec/mcemonitor/mcemonitor
######################################### [100%]
12