Installing Mcemonitor - NEC Express5800/A1040b User Manual

3.1.3

Installing mcemonitor

1. Login to the target machine as a root user.
2. The most recent version of RPM are available for download from the following website.
http://www.58support.nec.co.jp/global/download/index.html
3. Install mcemonitor RPM package of Machine Check Monitoring Service using rpm command.
# rpm -ivh mcl-mcemonitor1-2.4-2.02.el6.x86_64.rpm
Preparing...
1:mcl-mcemonitor1 ######################################### [100%]
Starting mcemonitor daemon[ OK ]
Note: acpi_call must be installed before installing mcemonitor.
If mcemonitor is installed while acpi_call has not been installed, the following message
is output and installation of mcemonitor fails.
# rpm -ivh mcl-mcemonitor1-2.4-2.02.el6.x86_64.rpm
error: Failed dependencies:
mcl-acpicall is needed by mcl-mcemonitor1-2.4-2.02.el6.x86_64
4. Confirm that mcemonitor RPM package of Machine Check Monitoring Service is installed
correctly. The following is displayed when installation completes successfully.
# rpm -qa | grep mcemonitor
mcl-mcemonitor1-2.4-2.02.el6.x86_64
5. Check if mcemonitor is started normally. If the following is displayed, mcemonitor is started
normally.
# ps aux | grep monitor
root 6078 0.0 0.0 4076 328 ? Ss 06:19 0:00 /opt/nec/mcemonitor/mcemonitor
6. Installation of package may not complete if the following message is displayed. Repeat from
Step 3 according to "Solution".
Error message
Solution
Error message
Solution
######################################### [100%]
package mcl-mcemonitor1-2.4-2.02.el6.x86_64 is already installed
Uninstall mcemonitor, and install it again.
error: unpacking of archive failed
on file: cpio: write failed - No space left on device
Disk space is insufficient. Increase free space, and install it again.
9