Danfoss EKC 315A Manual page 10

Manual
Miscellaneous parameters (continued)
Value of analog output at minimum current (terminals 2 & 5)
(only applicable to AKV/A or TQ)
Lower end of temperature or opening degree range that will yield a current
output of 0 mA or 4 mA, depending on the selection made for parameter o09
(only if AKV/A is used)
Value of analog output at maximum current (terminals 2 & 5)
(only applicable to AKV/A or TQ)
Upper end of temperature or opening degree range that will yield a current
output of 20 mA.
Refrigerant Setting
The refrigerant must be defined before startup. Failure to select the correct
refrigerant may result in compressor damage.
1 = R-12 2 = R-22
6 = R-13 7 = R-13b1
11 = R-114 12 = R-142b
16 = R-401A 17 = R-507
21 = R-407A 22 = R-407B
26 = R-600 27 = R-600a
10
EKC 315A Industrial Evaporator Controller
Description of setting
3 = R-134a 4 = R-502
8 = R-23 9 = R-500
13 = user defined 14 = R-32
18 = R-402A 19 = R-404A
23 = R-410A 24 = R-170
28 = R-744 29 = R-1270
USCO.PD.RD0.A1.22 / 521U0092
Parameter Minimum Maximum
o27
(-70°C)
o28
(-70 °C)
5 = R-717
10 = R-503 o30
15 = R-227
20 = R-407C
25 = R-290
Factory
setting
-94°F 320°F -31 °F
(160 °C) (-35 °C)
-94°F 320°F 59°F
(160 °C) (15 °C)
0 29 0
© Danfoss USCO (HMR_MKS), 04-2008
Field
setting