Table of Contents
Advertisement
GLXD6
Guitar Pedal Receiver with Integrated Tuner
2.4 GHz Frequency Tables
The following tables list receiver channels, frequencies, and latency for each
group:
Group/Channel
1/1
1/2
1/3
1/4
Group/Channel
2/1
2/2
2/3
2/4
2/5
Receiver Operation
Audio Gain Adjustment
Transmitter gain has an adjustment range from -20 dB to +40 dB, in 1 dB
increments.
Tip: Try the 0 dB (unity gain) setting as a starting point, and then make gain
adjustments if necessary.
1. Press and hold the mode button on the receiver until dB appears on the
display.
2. Press the up/down arrows to adjust the gain. For faster adjustments,
press and hold the buttons.
Note: The intensity of the green audio LED corresponds to the audio level.
Rapid flashing indicates audio clipping. Reduce the gain to remove the
overload.
d B
link
group
mode
audio
auto
rf
channel
Locking and Unlocking the Controls
The controls of the receiver and transmitter can be locked to prevent acciden-
tal or unauthorized changes to settings.
The following parameters are not affected by locking the controls:
•
Lock status is not changed by power cycles
•
Tuner functionality and editing remains available
•
The receiver power switch does not lock
8/17
Frequencies
2424 2425 2442 2443 2462 2464
2418 2419 2448 2450 2469 2471
2411 2413 2430 2431 2476 2477
2405 2406 2436 2437 2455 2457
Frequencies
2423 2424 2443 2444 2473 2474
2404 2405 2426 2427 2456 2457
2410 2411 2431 2432 2448 2449
2417 2418 2451 2452 2468 2469
2437 2438 2462 2463 2477 2478
- 9
link
group
mode
audio
auto
rf
channel
Group/Channel
3/1
3/2
3/3
3/4
3/5
3/6
3/7
3/8
Group/Channel
2404 2405 2410 2411 2417 2418 2423 2424
2426 2427 2431 2432 2437 2438 2443 2444
4/1
2448 2449 2451 2452 2456 2457 2462 2463
Locking the Receiver Controls
Simultaneously press and hold the group and channel buttons to lock or un-
lock the receiver.
•
LK is displayed if a locked control is pressed
•
UN is displayed momentarily to confirm the unlock command
Locking the Transmitter Power Switch
Starting with the transmitter set to off, press and hold the LINK button while
turning on the transmitter. Repeat sequence to unlock.
Note: The transmitter status LED will flash red/green if a locked switch is set
to the off position.
Remote ID
Use the Remote ID feature to identify linked transmitter and receiver pairs.
When Remote ID is active, the receiver LCD will blink and display ID. The
status LED of the corresponding transmitter will alternately flash red and
green for approximately 45 seconds.
To activate Remote ID:
1. Momentarily press the link button on the transmitter or receiver.
2. The display of the linked receiver will blink and show ID and the status
LED on the linked transmitter will flash red/green.
Shure Incorporated
Frequencies
2415 2416 2443
2422 2423 2439
2426 2427 2457
2447 2448 2468
2409 2451 2452
2431 2462 2463
2404 2473 2474
2435 2477 2478
Frequencies
2468 2469 2473 2474 2477 2478
2017/09/15
Advertisement
Table of Contents
