Included Components; Quick Start; Guitar Pedal Receiver Overview - Shure GLXD6 Instructions Manual

GLXD6 Guitar Pedal Receiver with Integrated Tuner
• Globally-unlicensed 2.4 GHz frequency band allows operation of up to
4 compatible systems in a typical setting and up to 8 compatible systems
under ideal conditions
Accessories
Optional Accessories
Car Battery Charger
Stand Alone Single Battery Charger

Quick Start

To reduce set up time, the transmitter and receiver automatically link to form
an audio channel the first time they are powered on and never have to be
linked again.
Note: If using multiple effects pedals, place the receiver pedal first in the
signal chain.
2
4

Guitar Pedal Receiver Overview

1
2 3
① Power Switch
Turns power on or off.
2/17
SBC-CAR
SBC10-902
3
1
4
link group
5
6
mode audio auto rf channel
7
• RF back-channel for remote control of transmitter functions
• Automatic transmitter power-off to conserve battery life when transmitter
is not in use.

Included Components

Shure Rechargeable Battery
Micro USB Battery Charger
Power Supply
Premium Guitar Cable
Step ①
Connect power supply to the receiver and plug the power cord into an AC
power source.
Step ②
Connect the transmitter to the instrument and turn on the transmitter.
Step ③
Connect receiver audio output to an amplifier or mixer. Turn on the receiver:
The blue rf LED will flash while the transmitter and receiver form a link. When
the link has successfully formed, the rf LED will remain illuminated.
Note: The transmitter and receiver will remain linked for future usage. At
power-up, the blue rf LED will illuminate, skipping the linking step.
Step ④
Check the audio and adjust the gain if necessary.
② DC Power Connector
Connect DC power supply (9 to 15 V DC, 250 mA min.)
Note: Compatible with positive tip or negative tip power supplies.
③ Audio Output Jack
Connect to amplifier or mixer.
Note: If using multiple effects pedals, place the receiver pedal first in the
signal chain.
6
④ USB Port
For uploading firmware updates
⑤ Display
Displays receiver and tuner settings.
⑥ Antenna
Two antennas per receiver. Antennas pick up the signal from the transmitter.
⑦ Footswitch
Press to select receiver or tuner mode.
Shure Incorporated
SB902
SBC10-USB
PS24
WA305
2017/09/15