Table of Contents
Advertisement
16.0 CONTROL SYSTEM
16.1
CONTROL PANEL
Two control panels have been placed on top of each other.
The top panel controls the burner at the top of the heat exchanger and is the "master". This panel controls the complete water heater. Only
when a lock out / error of the top burner has occurred, the water heater can be controlled by the bottom panel of the water heater
(automatically).
CONTROL PANEL
2 rows/ each 20 characters
MENU
COMM.
PORT
Press and hold for three seconds for stand-by/program. mode
ON/OFF
Press and hold for six seconds to switch boiler on/off.
RESET
ENTER
Used as RESET and ENTER button when programming.
Connector for connecting computer cable.
COMM.
PORT
Button is pushed to open MENU.
MENU
Buttons to toggle through measured temperatures.
Also used for navigating through the menus and for changing values.
Button to activate service function
(hold for three seconds).
SERVICE
Schornsteinfeger function (only for Germany).
Light: lights when controller detects good flame signal.
Lights when burner is burning.
DISPLAY
ON/OFF
RESET
ENTER
SERVICE
51
Advertisement
Table of Contents
