Additional Information - Cisco Telepresence VX Clinical Assistant Manual

Hide thumbs Also See for Telepresence VX Clinical Assistant:

Table of Contents

Available languages

Additional Information

Operation of the VXCA:

For more information on system setup and operation, please refer to the Cisco TelePresence VX Clinical Assistant ™ (VXCA) Installation and

User Guide:

http://www.cisco.com/en/US/products/ps12152/tsd_products_support_series_home.html

To Provide Power to the System:

Plug the system into a standard AC outlet as applicable with the system power configuration and flip power switch "on" at the bottom of the

unit next to the power cord and select the main power button on the power and battery meter panel.

The VXCA is now ready to be connected to the network on the rear of the VXCA, configured and then to begin making calls.

To place or receive a video call, use the appropriate buttons on the Infrared Remote Control included with the system and follow

the on screen prompting.

To connect to other equipment, there are multiple audio and video inputs on the side, rear, and front interface panels of the VXCA.

Devices connected to these inputs can be activated via the front button panel or the included infrared controller.

For more details, please refer to the C-Series codec documentation:

http://www.cisco.com/en/US/docs/telepresence/endpoint/codec-c-series/tc4/getting_started_guide/profile-series_codec-c-

series_quick-set-c20_getting_started_guide_tc41.pdf

General Cleaning:

Before cleaning, ensure that the system is turned off.

Direct the suction nozzle of vacuum cleaner to remove dirt/dust accumulated in crevices. Hand brush may be used to assist in

removing settled dirt/dust.

Use cloth dampens with ethyl alcohol to wipe clean the surfaces. Do not use excessive alcohol as the disinfectant is flammable.

Use 0.1% hypochlorite solution to wipe clean the surface of the monitor casings. Wait for 5 minutes and use another piece of cloth

dampened with water to clean off residual hypochlorite.

The glass surface of the camera lens to be cleaned with a soft lens cleaning cloth.

The video display surface of LCD monitor should be wiped gently using a damp cloth and never spray cleaning solution directly on

the display screen .

Cisco Telepresence VX Clinical Assistant ™ Specifications, Warnings and Precautions

Text Part Number: D30063

December | 2011 Cisco

Page 7

Table of Contents