INDEX Models and dimensions page Technical data Installation instructions Installation Legal and technical requisites Installation Wiring Unipotential Start-up Using the appliance Ignition Special precautions Cleaning and taking care of the appliance What to do if not using the appliance for a long time What to do if something goes wrong Maintenance...
Page 3
Dimensions ABH30004 ABH30009 400 x 650 x 300 (440) 600 x 650 x 300 (440) Weight approx. 35 kg Weight approx. 48 kg C D A C D A ABH30001/2/3 ABH30005/6 400 x 650 x 300 (440) 600 x 650 x 300 (440) Weight approx.
Page 4
Dimensions 400 x 700 x 870 (1080) 600 x 700 x 870 (1080) Weight approx. 69 kg Weight approx. 82 kg ACH30001/2/3 400 x 700 x 870 (1080) 600 x 700 x 870 (1080) Weight approx. 69 kg Weight approx. 82 kg Main switch Fat tray Pilot lamp (voltage)
Page 5
Dimensions 600 x 650 x 300 (440) 800 x 650 x 300 (510) Weight approx. 48 kg Weight approx. 70 kg C D A C D A ABH30007 600 x 650 x 300 (440) 800 x 650 x 300 (440) Weight approx.
Page 6
Dimensions 600 x 700 x 870 (1080) 800 x 700 x 870 (1080) Weight approx. 82 kg Weight approx. 102 kg C D A D C B D C B ACH30004/5 600 x 700 x 870 (1080) 800 x 700 x 870 (1080) Weight approx.
Page 7
Dimensions 400 x 700 x 300 (440) 600 x 700 x 300 (440) Weight approx. 35 kg Weight approx. 48 kg C D A ACH30018/19/20 400 x 700 x 300 (510) 600 x 700 x 300 (510) Weight approx. 35 kg Weight approx.
Page 8
Dimensions 600 x 700 x 300 (440) 800 x 700 x 300 (510) Weight approx. 48 kg Weight approx. 70 kg B C D A 600 x 700 x 300 (510) 800 x 700 x 300 (510) Weight approx. 48 kg Weight approx.
Technical data CAT/KAT GAS/GAZ II2H3B/P P mbar II2H3+ P mbar The data plate is located on the rigth hand side of the con- II2H3+ P mbar II2L3B/P P mbar trol panel and contains all the data needed for connecting 0051 II2ELL3B/P P mbar TIPO/TYPE...
INSTALLATION INSTRUCTIONS Before beginning installation, remove all packaging from Installation the appliance. Some parts are protected with an adhesive Installation, start-up and maintenance should only be car- film which should be carefully removed. ried out by expert personnel. All work required to install Any remnants of glue should be thoroughly cleaned using the appliance should be carried out in compliance with all suitable substances such as benzine.
USING THE APPLIANCE Warning! What to do if something goes wrong - Beware of inexpert handling! If anything goes wrong, immediately turn the appliance off, then turn off the power supply at the switch located Ignition upstream of the appliance, and call the aftersales depart- Check that the fat tray is in place.
Wiring diagrams ABH30001/2/3 ACH30001/2/3 ABH30004 11 21 31 P1P2 P3 12 22 32 L1 L 2 L 3 N 400 V 3N AC L1 L 2 L 3 230V 3 AC Line input terminal board Switch Thermostat Green pilot lamp Orange pilot lamp Resistance 1650 W Safety thermostat...
Page 13
Wiring diagrams ABH30009 ABH30005/6 ACH30018/19/20 12 22 32 11 21 31 11 21 31 P1P2 P3 12 22 32 400 V 3N AC L1 L 2 L 3 N L1 L 2 L 3 230V 3 AC Line input terminal board Switch Thermostat Green pilot lamp...
Page 14
Wiring diagrams 11 21 31 11 21 31 P1 P2 P3 12 22 32 P1 P2 P3 12 22 32 L1 L 2 L1 L 2 L 3 N 430 V 3N AC 230V 3 AC ABH30007/8 Line input terminal board Switch Thermostat Green pilot lamp...
WARNING THE MANUFACTURER CANNOT BE HELD RESPONSIBLE FOR ANY INACCURACIES IN THIS BOOKLET DUE TO COPYING OR PRINTING ERRORS. DUE TO ITS POLICY OF CONTINUAL PRODUCT IMPRO- VEMENT, THE MANUFACTURER RESERVES THE RIGHT TO MAKE ANY CHANGES DEEMED NECESSARY. THE MANUFACTURER CANNOT BE HELD RESPONSI- BLE IF THE INSTRUCTIONS CONTAINED IN THIS MA- NUAL ARE NOT OBSERVED.
Need help?
Do you have a question about the ABH3 Series and is the answer not in the manual?
Questions and answers