Parts Description; Before The First Use - Princess 219500 Instruction Manual

Instruction manual

PARTS DESCRIPTION

1. Tamper
2. Refill cup
3. Jar lid
4. Jar
5. Blades
6. Main body
7. Display
8. Control panel
9. Speed control knob
Display
10. Mode button "P"
11. Mode button "Crusher"
12. Timer
13. Mode button "1 min. smoothies blending"
14. Mode button "2 min. smoothies blending"
10 11 12
4
1
2
3
4
5
7
8
6
9
13 14

BEFORE THE FIRST USE

Note: Never use the blender without any food or liquid in it!
• Take the appliance and accessories out the box. Remove the stickers,
protective foil or plastic from the device.
• Before using the High Power Blender for the first time clean the jar and
lid with a damp cloth.
Caution: the jar contains very sharp blades, handle with care at all times.
• Place the main body of the High Power Blender on a heat-resistant,
stable surface. Place the jar on the base unit properly.
• The High Power Blender is equipped with a safety switch off on the
motor base.
• Make sure the jar is placed properly on the base.
• Put the lid on the jar. Ensure the refill cup is fitted in lid, turn clockwise to
lock. When the refill cup is not fitted properly there is a risk of splashing.
• When everything is installed correctly, connect the High Power Blender
to the mains power supply, the time display begin to flash. When you
don't see the time display flash make sure that the jar is pressed down
correctly to the base.
• The High Power Blender is now ready for use.
• Note: The time display only shows the remaining time, the time cannot
be adjusted by hand.
Note: The High Power Blender will only work when the speed control knob
is started from the "0" position.