Maintenance Steps - Wolf CGB-35 Maintenance Instructions Manual

Completion
Check gas train for soundness and
water connections for leaks.
• Fit the casing.
Test run
• Reset the MCBs.
• Open the gas tap.
• Switch the boiler ON.
• Set the program selector to emissions test
mode.
Carrying out a ventilation test
Check LAF for soundness, if the CO
0.2%.
Carrying out a flue gas test
In emissions test mode, enter the captured
values in the maintenance report.
Re-adjust the CO value, if required.
2
(see installation instructions).
3061491_0805

Maintenance steps

>
2
Emissions test mode position
"Flue gas"
test port
"Air supply"
test port
13