Advertisement
Quick Links
vent/suction mount
Wireless Charging Kit
USER MANUAL AP15AQI
Thank you for purchasing the AP15AQI Wireless Charging Kit.
It is compatible with all Qi enabled devices like Samsung S7/
S7 edge, S8/ S8 edge, iPhone8, iPhone8 plus, iPhoneX, etc.
For optimum performance and safety, please read this manual
carefully before using this product.
www.aerpro.com
Advertisement
Related Manuals for Aerpro AP15AQI
Summary of Contents for Aerpro AP15AQI
- Page 1 Wireless Charging Kit USER MANUAL AP15AQI Thank you for purchasing the AP15AQI Wireless Charging Kit. It is compatible with all Qi enabled devices like Samsung S7/ S7 edge, S8/ S8 edge, iPhone8, iPhone8 plus, iPhoneX, etc. For optimum performance and safety, please read this manual carefully before using this product.
-
Page 2: Specifications
AP15AQI Features: Touch Button for Releasing Infrared Sensor for Locking Power Button Extendable Wireless Charging Air Vent Area Clamp Wireless Charging Power Indicator Indicator Type-C Input Specifications: • Automatic lock and release • Silicone pad for anti-scratching • Built-in 250mAh battery •... - Page 3 How to Use Vent mount: Step 1: Attaching the vent clamp to the charging body Place the nut over the ball on the vent Loosen the nut mount. Press ball into charging base. Press to open Tighten the nut to complete Press button on vent clamp to open installation grip arms, then place mount on vent.
- Page 4 How to Use Suction mount: Step 1: Attaching the suction mount to the charging body, by placing the nut over the ball on the suction mount. Press ball into charging base, then tighten the nut to complete installation Step 2: Clean the surface you want to attach the suction mount to with a clean rag or an alcohol wipe.
-
Page 5: Using Your Device
Using your device: Step 1: Use the USB Type-C cable to connect to the USB power of the car or car charger Not included... - Page 6 Step 2: Press “Power button” to power on Step 3: Touch the top of the vent mount (Touch button) to automatically release the grip arms...
- Page 7 Step 4: Automatically locks grip arms once the IR sensor is triggered by phone proximity NOTE: Due to different phone sizes, the wireless charging contact area may vary. Adjust the feet by pulling down to allow alignment between the phone and the wireless charger contact area.
- Page 8 Step 5: Touch the top of the vent mount (Touch button) to automati- cally release the grip arms to remove phone...
- Page 9 Step 6: The AP15AQI grip arms will automatically lock after 5 minutes when not being used. Step 7: Alternatively press the power button for 3 seconds to turn the wireless charger completely off.
- Page 10 Fast Blinking Standby Slow Pulsing Phone Fully Charged TIPS: When using this product it must be connected to power. To achieve fast charging, a QC2.0/3.0/4.0 car charger is required. Aerpro models APL24QC & ADMQC3U meet the requirements are sold separately.
- Page 11 PRECAUTIONS: • Keep the product dry. Rain, moisture and various liquids may contain minerals that will corrode the circuit. If the product gets wet, dry it as soon as possible or use a soft cloth to wipe it clean. • When charging use a 5V/2A, 9V/2A charger. Do not use a lesser specification charger as the product with not operate correctly and will damage the product.
-
Page 12: Technical Assistance
8587 8866 Mon-Fri 9am – 5pm AEST If you would like to download a digital copy of this manual, or other Aerpro manuals/software, please visit the http://aerpro.com website. This manual is considered correct at time of printing but is subject to change.
Need help?
Do you have a question about the AP15AQI and is the answer not in the manual?
Questions and answers