Cisco TelePresence ISDN GW MSE 8321 Getting Started Manual page 7

3 Slide the ISDN GW MSE 8321 into the blade slot (as shown in Figure 2) until it
stops.
4 Simultaneously close both retaining latches on the blade (thereby engaging the
connectors at the rear of the blade) to secure it in the chassis as shown in
Figure 3.
5 Using a No.1 Phillips screwdriver, tighten the screws in the retaining latches
with a clockwise quarter turn.
Figure 2: Inserting a blade into the chassis
Installing the ISDN GW MSE 8321
7