Advertisement
Task Lists
Task List for MGX 8240 Private Line Service Gateway
Prepare site
•
•
Unpack/Required tools
Inventory parts
•
•
Check condition
Physically mount chassis
•
Check cable length
•
•
Check air flow ventilation and obstruction
Check air for contamination, humidity, and temperature
•
Mount I/O cards (including IMC I/O)
•
Mount PSM cards and IMC card
•
Connect bits clocks (if necessary)
•
•
Check voltage
Install power
•
Connect power from chassis to power source
•
•
Check fuses (if used)
Check voltage
•
•
Check Ready LED
Configure PC/terminal
•
Check software versions and revisions
•
•
Perform FDOS
Task List for Common Interface Module
Prepare site
•
•
Unpack/Required tools
Inventory parts
•
Release 2.2, 78-10084-01, November 1999
A P P E N D I X
Cisco MGX 8240 Hardware Installation Guide
A
A-1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Cisco Network Device MGX 8240
Summary of Contents for Cisco Network Device MGX 8240
- Page 1 Task Lists Task List for MGX 8240 Private Line Service Gateway Prepare site • • Unpack/Required tools Inventory parts • • Check condition Physically mount chassis • Check cable length • • Check air flow ventilation and obstruction Check air for contamination, humidity, and temperature •...
- Page 2 Task List for Common Interface Module Check condition of CIM • Mount the Common Interface Module in rack • Check cable length • Check air flow ventilation and obstruction • Check for air contamination, humidity, and temperature • Connect 10Base-T between the Common Interface Module and 1600 •...
Need help?
Do you have a question about the Network Device MGX 8240 and is the answer not in the manual?
Questions and answers