Convenience; Navigation; Memory Function; Adjustable Head Restraints - Ford F-150 2019 Quick Reference Manual

SYNC 3
® *

NAVIGATION

Your navigation system is comprised of two modes. Map mode shows
advanced viewing of 2D city maps, 3D landmarks and 3D city models
(when available). 2D city maps show detailed outlines of buildings,
visible land use and landscape features. Destination allows you to set a
destination through search, previous destinations or preset home, work and
favorite destinations.
Select Destination on the screen, then select Search. You can search
for a destination using a street address, partial address, city, point of
interest, intersection or latitude and longitude. Once you have chosen your
destination, press Start. The system uses a variety of screens and prompts
to guide you to your destination.
SETTINGS
Under the Settings menu, you can access and adjust the settings for many
of the system features. To access additional settings, swipe the screen left
or right.
USB AND POWER POINT LOCATIONS
Depending on your vehicle, you may nd USB and power point outlets in
and around the center console, in the instrument panel and on the back of
the center console for rear-seat passengers. See the Storage Compartment
chapter in your Owner's Manual for more details.
*if equipped

CONVENIENCE

MEMORY FUNCTION*

The memory function allows a
one-touch recall of personalized
memory features including
the driver seat, power mirrors,
adjustable pedals* and power
steering column*. Use the memory
controls on the driver door to
program and then recall memory
positions. To program a position, switch the ignition on. Adjust
the memory features to your desired positions. Press and hold
the desired preset button until you hear a single tone. You can
now use these controls to recall the set memory positions.
You can also program your memory seat to your transmitter.
That way, when you unlock your door with the transmitter, your
memory features automatically move into your saved positions.
See the Seats chapter in your Owner's Manual for more details.

ADJUSTABLE HEAD RESTRAINTS

Adjust the seatback to an upright driving position before
adjusting the head restraint. Adjust the head restraint so that
the top of it is level with the top of your head and as far forward
as possible. Make sure that you remain comfortable. To raise,
pull up on the head restraint. To lower, press the head restraint
down while pressing and holding the guide sleeve button.
You may also be able to tilt the head restraint forward or
backward for additional comfort. Pivot the head restraint
forward to the desired location. After the head restraint reaches
the forward-most tilt position, pivot it forward again to return it
to its standard position.
Note: After tilting the head restraint, do not attempt to force
the head restraint backward.
MULTI-CONTOUR FRONT SEATS WITH ACTIVE MOTION*
Using the button mounted on the outside of the front seats,
or through the touchscreen, you and a front-seat passenger
can adjust the massage and support settings. You can also
control the intensity of the massage, increase or decrease the
lumbar bolster and cushion support and adjust the height of
the bolster.
Refer to the Multi-Contour Front Seats with Active Motion section
in the Seats chapter in your Owner's Manual for more details.
*if equipped
16 - 17