Table of Contents
Advertisement
FastFrame NS11 Adapter
Technical specifications
Simultaneously supports multiple networking and
storage protocols: TCP/IP, iSCSI
Supports Data Center Bridging; Priority-based
Flow Control (PFC), Enhanced Transmission Selection
(ETS) and DCB Exchange
(DCBX) protocol
Up to 10Gb/s throughput per port
High-performance x8 PCIe 2.0 bus
Ethernet features
Data rate per port: 10Gb/s, 1Gb/s
Jumbo frame support up to 9,000 bytes
TSO, RSC, Tx/Rx IP, TCP & UDP checksum offloading
(IPv4, IPv6) capabilities, Transmission control protocol
(TCP), User datagram protocol (UDP), Internet protocol
(IP)
Large send offloads (LSO)
Descriptor ring and queue management optimizations
Host bus specifications
x8 mechanical and x8 electrical PCI
Express interconnect
Conforms to PCI Express Base Spec 2.0
Conforms to PCI Express CEM Spec 2.0
PCHI Hot Plug spec 1.0
Environmental & physical specifications
Length: 5.6 inches
Height: 2.71 inches
Operating temperature: 0 to 55 ºC (32 to 131 ºF)
Storage temperature: -40 to 70 ºC (-40 to 158 ºF)
Relative humidity: 10 to 90% non-condensing
4.7 W (typical)
100 lf/m (minimum) airflow recommended
RoHS compliant
External connectivity
Easy to install full height connection bracket; low-
profile bracket included in finished
goods packaging
External LEDs for on-line and speed status for each
port
Pluggable optical LC SFP+ module included
Software specifications
Microsoft® Windows Server®
Microsoft Windows®
macOS®
Linux
Advertisement
Table of Contents
