Fastframe Nt12 Adapter; Technical Specifications; Ethernet Features; Host Bus Specifications - ATTO Technology FastFrame NQ41 Installation And Operation Manual

Network interface card
Hide thumbs Also See for FastFrame NQ41:
Table of Contents

Advertisement

FastFrame NT12 Adapter

Technical specifications

Intel X540 10GBASE-T Ethernet Controller
Simultaneously supports multiple networking and
storage protocols: TCP/IP, iSCSI
Supports Data Center Bridging; Priority-based
Flow Control (PFC), Enhanced Transmission Selection
(ETS) and DCB Exchange
(DCBX) protocol
Up to 10Gb/s throughput per port
High-performance x8 PCIe 2.0 bus

Ethernet features

Data rate per port: 10Gb/s, 1Gb/s, 100Mb/s
Jumbo frame support up to 9,000 bytes
TSO, RSC, Tx/Rx IP, TCP & UDP checksum offloading
(IPv4, IPv6) capabilities, Transmission control protocol
(TCP), User datagram protocol (UDP), Internet protocol
(IP)
Large send offloads (LSO)
Descriptor ring and queue
management optimizations

Host bus specifications

x8 mechanical and x8 electrical PCI
Express 2.0 interconnect
Backward compatible with PCI Express 1.1
Supports PCI Express Base Spec 2.0
Supports PCI Express CEM Spec 2.0
Environmental & physical specifications
Length: 5.6 inches
Height: 2.71 inches
Operating temperature: 0 to 55 ºC (32 to 131 ºF)
Storage temperature: -40 to 70 ºC (-40 to 158 ºF)
Relative humidity: 10 to 90% non-condensing
13.6W (typical)
200 lf/m (minimum) airflow recommended
RoHS compliant

External connectivity

Easy to install full height connection bracket; low-
profile bracket included in finished goods packaging
External LEDs for link speed and activity
for each port
Compatible with CAT-7, CAT-6a, and CAT-6 Ethernet
cables for 10GBASE-T connections and CAT-5e for
1000BASE-T and
100BASE-TX connections

Software specifications

Microsoft® Windows Server®
Microsoft Windows®
macOS®
Linux

Advertisement

Table of Contents
loading

Table of Contents