Table of Contents
Advertisement
FreeBSD
These steps assume a basic knowledge of FreeBSD
terminal commands. You must also have the correct kernal source files
for the appropriate kernel already installed.These steps also assume
the user has a GUI and internet browser installed, or an external
machine which can download the driver and transfer it to the
appropriate machine running a supported version of FreeBSD.
1. Power on your system and log in as the administrator or
a user with proper administrative privileges.
2. Go to
https://www.atto.com/
3. Click on downloads
4. Register or log in if previously registered.
5. Click on Ethernet Adapters in the left dialog.
6. Navigate to your HBA model/family in the right dialog
and click on it.
macOS
1. Power on your system and log in as the administrator or
a user with proper administrative privileges
2. Go to
https://www.atto.com/
3. Click on downloads.
4. Register or log in if previously registered.
7.
Scroll down to and click the desired driver depending on
the operating system.
8.
A download window appears. Choose Save File.
9.
After the download has completed, open the FastFrame
volume on the desktop.
10. Open the FreeBSD folder.
11. Open the Drivers folder.
12. Copy the .tgz file to a temporary folder.
13. Open a terminal window and change the location of the
copied tgz.
14. Extract the file using the command tar -xfz
<filename.tgz>.
15. Change to the directory created above then run the
installer script ./install.sh.
5.
Click on Ethernet Adapters in the left dialog. 6 Navigate
to your HBA model/family in the right dialog and click on
it.
6.
Scroll down to and click the desired driver depending on
the operating system.
7.
A download window appears. Choose Save File.
8.
Launch the installer package.
9.
Follow the on-screen instructions.
Advertisement
Table of Contents
