Vax TBTSV1B1 Manual page 13

Cleaning the separator
Remove the filter cover
and pre-motor filter from
the separator. Go to
'Cleaning filter'.
Line up the separator with
the dirt container and
slide the separator into the
dirt container to refit.
Taking care of your machine
Tap the separator over a
bin to remove any dirt/
debris and wipe with a
clean dry cloth.
Tilt the dirt container
to line up with the main
body, push the dirt
container back into the
main body until it clicks
into place.
Refit the pre-motor filter
into the separator with the
filter tab at the top.
Line up the filter cover
with the separator and
twist clockwise to lock
into place.
Incorrect fitting of the filter,
separator or dirt container
will reduce suction and
performance. Never use the
vacuum cleaner without the
filter in place.
CAUTION