Vax TBTSV1B1 Manual page 12

Taking care of your machine
Cleaning the filter
NOTE: Filters should be replaced every 6-9 months.
Press the dirt container
release button.
Pull the tab on the
pre-motor filter to remove
from inside the separator.
Lift to remove the dirt
container from the
main body.
Tap the filter over a bin
to remove any dirt/debris.
Wash the filter under
running water
(40 degrees max).
Lift the separator and filter
out from the dirt container.
24hr
Leave for 24hrs or until
fully dry before replacing.
Twist the filter cover anti
clockwise to unlock and
remove from separator.
For best cleaning results
filters require cleaning
every 4-6 uses or as
needed depending upon
use. Do not use your
vacuum cleaner without
the filter in place.
CAUTION