Using Your Machine - Vax TBTSV1B1 Manual

Using your machine

Using the vacuum cleaner
CAUTION: The brushbar will constantly rotate. Never leave the vacuum cleaner in one spot for an extended period
of time as this may damage the floor surface. Vax cannot be held responsible for damage to the floor surface if the
customer fails to take notice of this recommendation.
Unplug the charger from
the mains and from the
machine charging port.
Slide the on/off suction
control switch all the way
back to switch the power
and LED light 'Off'.
NOTE: The brushbar will continue to rotate when the vacuum cleaner is switched on and in the upright position.
Place foot on the
floorhead and pull
the handle backwards
to recline.
Slide the on/off suction
control switch forward
once for low suction.
The LED indicator charge
light will illuminate green,
indicating the power is on
and the brushbar will spin.
Slide the on/off suction
control switch forward
again for max suction.