Step - Kids First Coding & Robotics Experiment Manual

9

STEP 9

You will also need a piece of
paper raised up on a small stand.
CHALLENGE 1
Set up the map cards as
shown. Place a piece of
paper on the card as shown,
with a small stand under
it that will allow the forks
to slide under the piece of
paper to lift it up.
Create a program with the
code cards to move the
forklift robot from the Start
card to the event map card A,
where it will lift up the piece
of paper. With the paper
lifted, program the robot to
move to map card B.
4
FORKLIFT
STEP OK
11
LIFT THE CARGO
Place the stand on
the map card and
put the paper on
the stand.
MAP
10
STEP 10
Forks
A
DONE
Start with
the forks
down
(not up as
shown).
Use the Start
and event
map cards and
code cards
from the base
kit. Disregard
the arrows on
the Start map
card for this
B
challenge.