Kids First Coding & Robotics Experiment Manual page 18

x2
12
14
CHALLENGE 6
Set up the map cards
as shown.
Create a program with
the code cards to move
the scissor lift robot
from the Start card to
the event map card A,
where it will raise its
platform up into the air,
lower it, and raise it up
again. With the platform
raised, program the
robot to move to map
card B.
16
SCISSOR LIFT
11
RAISE THE PLATFORM
Start with
the scissor
lift platform
lowered, not
raised.
MAP
Use the Start and event
map cards and code
cards from the base kit.
13
15
A
DONE
B