Kids First Coding & Robotics Experiment Manual page 16

8
x2
11
CHALLENGE 5
Set up the map cards as
shown. Place some small
objects to be pushed by
the bulldozer on the map
card as shown.
Create a program with
the code cards to move
the bulldozer robot from
the Start card to the event
map card A, pushing the
load with its blade in the
process. At the event
card, it should raise its
blade and move to map
card B.
14
BULLDOZER
9
x2
PUSH THE LOAD
MAP
10
12
Blade
Start with the blade of the bulldozer
in the down position.
Place some small
objects in the path
of the bulldozer on
the map card here.
A
Use the Start and event
map cards and code
cards from the base kit.
DONE
B