Panasonic TY-TP42P8-S Service Manual page 34

TY-TP42P8-S / TY-TP50P8-S
5. Pointing Test
Pointing test is to check the function of Touch Panel after repaired.
Click "Pointing Test" (F), then new window opens. The frame in window is the image of whole screen of Touch Panel.
Touch the Touch Panel then, the touched place is shown inside the frame.
Check the touch pen functions by touching the frame with the Touch Pen.
Check the Pen tip´s operation by "ON" / "OFF" shown in the Touch Pen status below.
Check the Function switch in the middle of the pen operating check by "ON" / "OFF" shown in the Touch Pen status below.
6. End
Click "TestEnd" button(G) to end the program.
After ending the test program, remove the USB cable and insert it again. Then, run the Touch Panel driver to use Touch Panel.
34