Connecting The Attachments; Using The Appliance - Philips Salon Multistylist 8-in-1 User Manual

EnglisH
8

Connecting the attachments

1 Insert one of the attachments into the handle. Make sure that the
stand is pointing downwards (Fig. ).
 Turn the locking ring on the handle to the right until the bold
arrow on the locking ring is in line with the arrow on the handle.
The attachment is now securely fixed to the handle (Fig. 3).
Follow this procedure for all attachments. To detach the
,
attachments, turn the locking ring to the left and pull the
attachment out of the handle.
Unplug the appliance when you remove an attachment after or during
styling. Avoid touching the metal and ceramic parts of the attachment,
as they are hot.

using the appliance

With the Salon Multistylist 8-in-1 you can create tight curls, large curls,
waves, ringlets, crimps and a sleek look.
1 After having connected the attachment to the handle, place the
appliance on the stand of the attachment and put the mains plug in
the wall socket. The pilot light goes on and the appliance starts
heating up (Fig. ).
 Start styling when the ready dot on the attachment changes
colour (Fig. 5).
 When using one of the curling attachments or the brush
attachment, always make sure the end of the lock is wound in the
required direction.
 How long you have to keep the styler in your hair depends on the
thickness of your hair. If you have fine hair, 5 seconds will be long
enough for a good result. Leave the styler in your hair longer (max.
10 seconds) if your hair is thicker.