Dynorbital Silver Supreme Safety, Operation And Maintenance Manual

Dynorbital
12,000 RPM Random Orbital Sander
SAFETY, OPERATION AND MAINTENANCE - SAVE THIS DOCUMENT, EDUCATE ALL PERSONNEL
Models:
3/8" Orbit 3/16" Orbit
69000 69010 69015 69025
69003 69013 69018 69028
69004 69014 69019 69029
69005 69060 69020 69061
69008 69100 69023 69105
69009 69103 69024 69108
69104
FIND THE MOST CURRENT OFFERING OF SUPPORT DOCUMENTS AND ACCESSORIES AT WWW.DYNABRADE.COM
Read and understand this tool manual before operating your air tool. Follow all safety rules for the protection of operating personnel as well as
adjacent areas. Always operate, inspect and maintain this tool in accordance with the American National Standards Institute (ANSI) Safety Code
for Portable Air Tools – B186.1. For additional safety information, refer to Safety Requirements for the Use, Care and Protection of Abrasive
Wheels – ANSI B7.1, Code of Federal Regulation – CFR 29 Part 1910, European Committee for Standards (EN) Hand Held Non-Electric Power
Tools – Safety Requirements and applicable State and Local Regulations.
Read and understand tool manual before
work starts to reduce risk of injury to
operator, visitors, and tool.
Eye protection must be worn
at all times, eye protection to
conform to ANSI Z87.1.
Respiratory protection to be used when
exposed to contaminants that exceed the
applicable threshold limit values required by law.
Some dust created by sanding, grinding, drilling, and other construction activities contain chemicals known to cause cancer, birth defects
or other reproductive harm. Some examples of these chemicals are:
• Lead from lead-based paints
• Crystalline silica from bricks and cement and other masonry products
• Arsenic and chromium from chemically treated lumber
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well
ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.

SAFETY INSTRUCTIONS

CAREFULLY READ AND UNDERSTAND
PNEUMATIC TOOL SAFETY GUIDELINES (P/N 00001676) BEFORE HANDLING OR USING TOOL.
Carefully Read all instructions before operating or servicing any Dynabrade
Products offered by Dynabrade are not to be modified, converted or otherwise altered from the original design.
Tool Intent: Dynorbital ® Silver Supreme Sanders are used for sanding and finishing a variety of materials including wood, metal, plastic, fiberglass,
solid surfaces, composites, rubber, glass and stone.
DO NOT USE tool for anything other than its intended applications.
Training: Proper care, maintenance, and storage of your air tool will maximize tools performance and reduce chance for accident.
Employer's Responsibility: Provide operators with safety instructions and training for safe use of tools and accessories.
REPORT TO YOUR SUPERVISOR ANY CONDITION OF THE TOOL, ACCESSORIES, OR OPERATION YOU CONSIDER UNSAFE.
Silver Supreme
®
3/32" Orbit
69030 69040
69033 69043
69034 69044
69035 69062
69038 69110
69039 69113
69109 69114
WARNING
Practice safety requirements. Work alert,
have proper attire, and do not operate tools under
the influence of alcohol or drugs.
Ear protection to be worn when exposure to sound,
exceeds the limits of applicable Federal, State or local
statues, ordinances and/or regulations.
Air line hazard, pressurized supply lines and flexible hoses
can cause serious injury. Do not use damaged, frayed or
deteriorated air hoses and fittings.
® Abrasive Power Tool.
Parts Page Reorder No. PD10•36
Effective October, 2010
Supersedes PD09•02
Model 69020
Shown