Table of Contents
Advertisement
PACKING LIST
Please verify that the product is complete and without any damage.
The following items must be included:
• F3.00 Paddlewheel Flow Sensor
• Instruction Manual for F3.00 Paddlewheel Flow Sensor
DESCRIPTION
The simple and reliable paddlewheel flow sensor type F3.00 is designed for
use with every kind of solid-free liquids. The sensor can measure flow from
0.15 m/s (0.5 ft/s) producing a frequency output signal highly repeatable.
A rugged construction and a proven technology guarantee exceptional
performances with little or no maintenance required. A dedicated electronic,
with a push-pull output, is available for a safe connection to any
kind of PLC/Instrument digital input. A specially designed family of fittings
ensures an easy and quick installation into all pipe materials in sizes from
DN15 to DN600 (0.5" to 24").
TECHNICAL DATA
General
• Pipe Size Range: DN15 to DN600 (0.5" to 24") Please refer to Installation
Fittings section for more details
• Flow Rate Range: 0.15 to 8 m/s (0.5 to 25 ft./s)
• Linearity: ± 0.75 % of full scale
• Repeatability: ± 0.5 % of full scale
• Minimum Reynolds Number Required: 4500
• Enclosure: IP68 or IP65
• Wetted Materials:
- sensor Body: CPVC, PVDF, 316L SS
- o-rings: EPDM or FPM
- rotor: ECTFE (Halar®)
- shaft: Ceramic (Al
- bearings: Ceramic (Al
Specific for F3.00.H
• Supply voltage: 5 to 24 VDC ± 10% regulated
• Supply current: < 30 mA @ 24 VDC
• Output signal:
- square wave
- frequency: 45 Hz per m/s nominal
(13.7 Hz per ft/s nominal)
- type: transistor NPN open collector
- output current: 10 mA max
• Cable length: 8 m (26.4 ft) standard, 300 m (990 ft)maximum
2
O
)/316L SS (only for metal sensors)
2
3
O
)
2
3
Advertisement
Table of Contents
