Dasylab Platinum Modbus Register Access - Newport PLATINUM Series Manual

DasyLab Platinum Modbus Interface
564 0x0234 OUTPUT_5_STATE
565 0x0235 OUTPUT_6_STATE
566 0x0236 OUTPUT_7_STATE
567 0x0237 OUTPUT_8_STATE
576 0x0240 RUN_MODE
578 0x0242 LATCH_RESET
1280 0x0500 ALARM_1_STATE
1312 0x0520 ALARM_2_STATE
1472 0x05c0 EXCITATION_VOLTAGE*
1504 0x05e0 DB_ANNUNCIATOR_1_STATE
1508 0x05e4 DB_ANNUNCIATOR_2_STATE

3.2 DasyLab Platinum Modbus Register Access

The following specifications have been verified with DasyLab version 13. Refer to DasyLab specific
documentation for further details.
The DasyLab software package allows the integration of Modbus compatible equipment through the
Modbus Input/Output Module. All Platinum registers are treated as Analog INPUT or Analog OUTPUT
values. Use Modbus Analog Input module to request data from Platinum and use Modbus Analog
Output module to send data to Platinum.
Document Number
For Internal Use Only: This document contains confidential, proprietary information of Omega Engineering/Newport Electronics,
The Document may not be copied or reproduced without the prior, written permission of Omega Engineering/Newport Electronics
R Flag indicating state of Output (0/1)
R Flag indicating state of Output (0/1)
R Flag indicating state of Output (0/1)
R Flag indicating state of Output (0/1)
Control Functions
R Enumerated value – system running state
R Write 1 to reset latched alarms
Alarm Configuration
R Alarm state (Bit 0)
R
Excitation Voltage
R Enumerated Excitation Voltage
Annunciators
R Enumerated Annunciator State
R Enumerated Annunciator State
Revision 1.0
Page 8 of 11