Sony PWS-100TD1 Operation Manual page 24

About RAID configuration
The PWS-100TD1 supports the following RAID configurations when a total of 12 HDDs are installed.
• 2D + 1P: Contains a total of four logical drives, where each logical drive contains two data HDDs and one parity HDD.
• 3D + 1P: Contains a total of three logical drives, where each logical drive contains three data HDDs and one parity HDD.
• 5D + 1P: Contains a total of two logical drives, where each logical drive contains five data HDDs and one parity HDD.
For 2 inputs/2 outputs
VTR
For 3 inputs/1 output
VTR
24
Overview
Logical drives (5D+1P)
SDI input
SDI input
PWS-100TD1
Logical drives (3D+1P)
SDI input
SDI input
SDI input
PWS-100TD1
External monitor
SDI output
SDI output
External monitor
SDI output