Turning On The Phone; Pin And Pin2 (4 To 8 Digits) - Compal TG7 User Manual

The Li-ion battery that comes with this phone is rechargeable.
Please use the charger and the battery provided by the original
manufacturer to ensure a long lifetime for the cellular phone.
1. Plug the charger into an appropriate outlet that meets the
requirements of this phone. The other end is connected to
the phone. While the phone is recharging, the screen will
automatically display the current power recharge status of
the battery via a flashing signal. The phone can still function
normally if it is turned on while being recharged. Once the
recharging process is finished, the flashing signal will stop.
2. Once the recharging process is completed, the charger can
be disconnected from the phone and electrical outlet.
3. Use only chargers certified by the original mobile phone
manufacturer. This is an international charger (Model:
KWS05C is subject to change in different countries). Read
instructions on the charger label before use.
4. A 'battery low' message will be displayed on the screen to
alert you of battery low condition. The mobile phone will
automatically shut down when the battery is exceptionally
low.
5. If the battery is totally out of power, the battery requires to be
recharged at least ten minutes. Otherwise, it might have
difficulty to turn on.

Turning on the Phone

To turn the phone on, hold the
seconds. If the message "Enter PIN:" shows on the screen, the
preset "PIN:" code of the SIM card must be keyed in (please
refer to the Manual provided by the telecommunication
company for details). Then, press the

PIN and PIN2 (4 to 8 digits)

A PIN (Personal Identification Number) code is stored in your
SIM card and is supplied by your SIM card network provider.
To prevent unauthorized use, your PIN1 code will be required
every time while you turn on your phone. Key-in the correct
Basic Operation
key for about 2~3
key.
30