Status Report; Broadcast; Read; Filter - Compal TG7 User Manual

a " " indicator.

Status Report

When sending out a message, the receiver will return a receipt to
SMS and SMS will forward it back to sender.

Broadcast

The Broadcast function is to send the message to all users in a
certain region via the telecommunication network. This function is
provided by telecommunication company. Please contact you
supplier.

1. Read

This allows you to read the last broadcast message received. The
phone stores this last message only when it is switched on.

2. Filter

This allows you to select the type of cell broadcast message you
want to receive. The filter menu contains a list of codes for CB
type of messages, which are defined by the network service.
All
Receive all broadcast messages.
None
Receive no messages.
List
List all the channels in which you want the messages to be
received. Depended on different broadcast area, the number of
the channel will be different. By pressing the
enter selection menu to add or delete.

3. Auto Display

This allows you to switch the auto display function on/off. When
the function is set on, broadcast messages will automatically be
displayed. Using the arrow keys allows you to scroll the
messages. Pressing OK or NO allows you to exit. Broadcast
messages automatically disappear after a short period of time.
(Note: The function requires the support by telecommunication
network service. Contact you telecommunication service
Menu Function
key, you can
44