Installation & Removing; Installing The Battery; Removing The Battery - Compal TG7 User Manual

Installation & Removing

Installing the battery

1. Press the lock on the bottom and then slide the battery cover
backward and lift up battery cover.
2. Hold the battery and wedge it under two up corners and
press the battery pack into place. Make sure that golden
connector are facing the connector on the phone.
3. Place the cover into the track and slide it forward and lock
with cover latch.

Removing the battery

1. Turn phone off and repeat the above item 1 to open the
battery cover.
2. Lift up the bottom of the battery pack and pull battery by
sliding backward to detach the battery from phone.
3. Repeat above item 3 to recover the battery cover.
Basic Operation
21