Switching On The Phone - Compal XGT Manual

4. A 'battery low' message will display on the screen to alert you
to a battery low condition. The phone will automatically shut
down when the battery is exceptionally low.
5. If the battery totally runs out of power, the battery needs to be
recharged at least ten minutes. Otherwise, this phone may
be difficult to be switched on.

Switching on the Phone

To switch on the phone, please hold
seconds. If the message "Enter PIN:" shows on the screen, the
"PIN:" code of the SIM card must be entered in (please refer to
the Manual provided by the telecom service provider for more
information). Then, press
PIN and PIN2 (4 to 8 digits)
A PIN (Personal Identification Number) code is stored in your
SIM card and is supplied by your SIM card network service
provider. To prevent unauthorized use, you need to enter PIN1
code each time while you switch on your phone. Enter the
correct PIN1 code and press
Important! :
1. If a wrong PIN code is entered over
limited trials regulated by system
operators, the phone becomes locked or
disabled. You must ask for your network
provider to use the PUK code to unlock or
enable the phone again.
2. PIN2 code is for other functions, such as
certain number dialing and barring.
PUK1 and PUK2 (8 digits)
The PUK (Personal Unblocking Key) code is required to change
a blocked PIN code. Check with your network provider for the
Basic Operation
for around 2~3
to switch on the phone.
.
45