Self Check Function; Self Check - Panasonic TX-32LXD500 Service Manual

4 Self Check Function

4.1.

Self Check

1. Self-Check is used to automatically check the bus lines and hexadecimal code of the TV set.
2. To get into the Self -Check mode press the Down (
time pressing the Status/Information (
3. Turn off the TV to reset JPEG Viewer circuit after SELF-CHECK.
If the CCU ports have been checked and found to be incorrect or not located then "--" will appear in place of "O.K.".
MEM
GC4P
GC4L
GC3FS
HAD
AVSW1
AVSW2
Tun1
DAC1
DAC2
DAC3
MSP
SDM
HDMI
IPC
ADV
) button on the remote control, and the screen will show :
Display Ref. No.
IC1107
IC4054
IC4057
IC4013
IC4012
IC3005
IC2105
TU3201
IC1106
IC1116
IC3006
IC2106
SD-Module
IC5003
IC8013
IC4005
TX-32LXD500 / TX-26LXD500 / TX-32LX500F / TX-32LX500P / TX-26LX500F / TX-26LX500P
) button on the customer controls at the front of the set, at the same
Description
Memory
Global Core Processor
Global Core
Global Core for Sub
OSD RGB A/D Converter
AV Switch VIDEO
AV Switch AUDIO
Tuner
DAC control 1
DAC control 2
DAC control 3
Stereo Decoder
MPEG4/PHOTO view, SD
recording
HDMI I/F Receiver
HDSL PEAKS Lite
A/D Converter
7
P.C.B.
DG-Board
DG-Board
DG-Board
DG-Board
DG-Board
H-Board
H-Board
H-Board
DG-Board
DG-Board
H-Board
H-Board
SD-Module
DV-Board
XV-Board
DG-Board