Operating Instructions Digital Progressive LCD TV PULL IDTV TX-32LXD55F Model No. The image shown is for illustration only. This set is only for use in Germany. Please read these instructions before operating your set and retain them for future reference.
Dear Panasonic Customer, We hope that you have many years of enjoyment from your new TV. The Quick Start Guide section at the be gin ning of this instruction book will allow you to use the TV as quickly as possible. We recommend that you then read the complete instruction book, and keep it to refer to as you explore the range of advanced features that this LCD TV offers.
• This type of LCD panel damage, is not an operating defect, tablecloths and curtains. and as such is not covered by the Panasonic warranty. Fitting remote control batteries “R6 (UM3)” size Replace the cover.
Cable cover removal and fi tting Removal 1. Push down hooks and pull the cover slightly towards yourself to disengage the claws (at 3 points). 2. Slowly pull out in the downward direction. Fitting 1. Insert the claws (at 3 points) at the bottom end. 2.
Quick Start Guide Connection and setting up options Please ensure that the unit is disconnected from the mains RF cable before attaching or disconnecting any leads. (Not supplied) SET TOP BOX COMPONENT Scart cables (Not supplied) AUDIO VIDEO S-VIDEO VIDEO VIDEO S-VIDEO VIDEO...
Page 6
Quick Start Guide DVB Auto Setup Auto setup will begin. Please Wait ! Prog. Channel Service Name NetID. TS ID. Quality The TV will search for DVB stations and Analogue stations: 12302 4158 12302 4158 TV stations will be located, sorted into order and stored ready for use. ProSieben 12302 4158...
Basic controls: front panel and remote control On / Off switch STR (Normalization store) Headphones jack AV3 terminals Used to store tuning and other function settings. (see page 33) (see page 33) F (Function select) TV/AV button (see page 33) Displays the On Screen Display functions, use repeatedly to select from the available functions - Increases or decreases the programme position by one.
Using the On Screen Displays Many features available on this TV can be accessed via the On Screen Display menu system. Use the remote control as shown below to access and adjust features as desired. Analogue Press the MODE button to select DVB or Analogue MODE MODE mode.
Picture menu MENU Press the MENU button. MODE Move to choose Picture menu. Access Picture menu. Move to choose menu option. Adjust chosen option or access chosen menu. EXIT Press the EXIT button at any time to go back to watching TV. IDTV Viewing mode The Viewing mode menu allows you to select four different...
Sound menu MENU Press the MENU button. MODE Move to choose Sound menu. Access Sound menu. Move to choose menu option. Adjust chosen option or access chosen menu. EXIT Press the EXIT button at any time to go back to watching TV. IDTV Bass Increase or decrease level to enhance or minimise lower,...
Setup menu MENU Press the MENU button. MODE Move to choose Setup menu. Access Setup menu. Move to choose menu option. Adjust chosen option or access chosen menu. EXIT Press the EXIT button at any time to go back to watching TV. IDTV Q-Link Allows you to select which AV terminal is to be used for data...
Tuning menu – overview (Analogue mode) In Analogue mode MENU MODE Press the MENU button. Move to choose Setup menu. Access Setup menu. Move to choose Tuning menu. Access Tuning menu. Move to choose menu option. IDTV Adjust chosen option or access chosen menu. EXIT Press the EXIT button at any time to go back to watching TV.
Tuning menu – Programme edit (Analogue mode) In Analogue mode MODE MENU Press the MENU button. Move to choose Setup menu. Access Setup menu. Move to choose Tuning menu. Access Tuning menu. Move to choose Programme edit. IDTV Access Programme edit. Move to choose programme position (e.g., Prog.
Tuning menu – Programme edit (Analogue mode) Renaming a programme channel Move to the Name column. Programme edit Prog. Chan. Name Lock CH44 Choose the new character. The box at the bottom of the screen shows CH51 CH41 the character currently selected. CH47 CH37 ABCDEFGHIJKLMNOPQRST...
Tuning menu – Auto setup (Analogue mode) Auto setup automatically retunes your TV. This feature is useful if, e.g., you move house and wish to retune your TV to receive the local stations. In Analogue mode MENU Press the MENU button. MODE Move to choose Setup menu.
Tuning menu – Manual tuning (Analogue mode) It is possible to retune individual programme positions: In Analogue mode MENU Press the MENU button. MODE Move to choose Setup menu. Access Setup menu. Move to choose Tuning menu. Access Tuning menu. Move to choose Manual tuning.
DVB Setup Menu – overview (DVB mode) In DVB mode MENU MODE Press the MENU button. Move to choose Setup menu. Access Setup menu. Move to choose DVB Setup Menu. Access DVB Setup Menu. Move to choose menu option. Adjust chosen option or access chosen menu. IDTV EXIT Press the EXIT button at any time to go back to watching TV.
Profi le Edit (DVB mode) The Profi le Edit menu allows you to select your favourite programme positions and display them in the Information banner, to allow quick and easy access to the programmes you watch most often. The programme number is given sequentially.
DVB Tuning Menu (DVB mode) DVB Tuning Menu provides access to DVB Tuning features. In DVB mode MENU Press the MENU button. MODE Move to choose Setup menu. Access Setup menu. Move to choose DVB Setup Menu. Access DVB Setup Menu. Move to choose Tuning Menu.
DVB Tuning Menu – DVB Auto Setup (DVB mode) DVB Auto Setup automatically retunes your TV. This feature is useful if, e.g., you move house and wish to retune your TV to receive the local stations. In DVB mode MENU Press the MENU button.
DVB System Setup (DVB mode) The DVB System Setup menu provides access to DVB specifi c options. In DVB mode MENU Press the MENU button. MODE Move to choose Setup menu. Access Setup menu. Move to choose DVB Setup Menu. Access DVB Setup Menu.
Common Interface Module (DVB mode) The Common Interface Module menu provides access to software contained on Common Interface (CI) Modules. These can be inserted in the “CI” slot located at the rear of the TV. IMPORTANT NOTES: • Switch off the TV using the front panel switch before inserting or removing a module. •...
DVB System Update (DVB mode) From time to time new versions of software will become available to enhance the performance and features of this TV. Auto Update Search in Standby (Overnight) During the night time, this TV will automatically search for any new available software being broadcast. If a new software version is found, the unit will automatically download and install this new version.
DVB System Update (DVB mode) System Update Search Now (Manual Download) To manually check if a new software version is available, select System Update Search Now in DVB System Update menu. In DVB mode MENU Press the MENU button. MODE Move to choose Setup menu.
Information banner In DVB mode MODE Information banner will appear when changing channel, pressing the button or the GUIDE button. The banner gives the user information about the channel and programme currently GUIDE being viewed. The banner will time out and disappear from the screen after a set time period, this time period can be set in the DVB System Setup menu.
Q-Link Q-Link allows the television to communicate with a compatible VCR or DVD Recorder. For Q-Link communication to work, the TV must be connected to a recording device with the “Q-Link”, “NEXTVIEWLINK”, “DATA LOGIC”, “Easy Link”, “Megalogic” or “SMARTLINK” logo using a “fully wired” Scart cable between the AV2 / AV4 terminal of the television and the appropriate terminal on your VCR or DVD Recorder.
This is not available for 720p and 1080i signals input. Aspect is fi xed to 16:9. IDTV Panasonic Auto Panasonic Auto determines the best aspect ra tio to use to fi ll your screen. It does this using a four step process to determine if the picture being viewed is WIDE a widescreen picture.
Page 28
Aspect Controls 16 : 9 16 : 9 16:9 will display a true 16:9 (anamorphic) picture with no aspect distortions. 16 : 9 14 : 9 14 : 9 14:9 will display a 14:9 picture at its standard 14:9 size without any stretching.
VCR / DVD operation The Remote Control is capable of operating some functions of selected Panasonic VCRs and DVD (Digital Versatile Disc) equipment. Some VCR and DVD equipment have different functions, so to ensure compatibility please refer to the equipment’s instruction book or consult your dealer for details.
Teletext operation • Teletext features may vary depending on the Broadcasting Companies and is only available if the channel selected is transmitting Teletext. • Pressing the MENU button three times whilst in Teletext operation will display the contrast function with a cyan bar, press the left and right cursor buttons to alter the setting as required.
Page 31
Teletext operation It is not possible to change the programme position when in News fl ash, Update or Sub Coded Page Access operation. Favourite Page (F.P.) Stores a favourite page in memory for instant recall. To store such a page, the TV must be in List mode, and the programme position in Analogue mode must be from 1 - 25 (any Blue programme positions are available in DVB mode).
Teletext operation Alternatively, if you know which sub page you require, press the MENU button (to display special functions) followed by the Blue button; T**** will be displayed where the page number is normally found. Enter desired sub page number before the T**** disappears. e.g., to select page 6 enter 0, 0, 0 and 6.
Connections It is possible to connect a variety of additional equipment to this TV. The following pages detail how to connect external equipment to the front and rear of the TV. Once your equipment is connected, use the following procedure to view the input: While viewing a TV channel TV/AV Press the TV/AV button.
Connections To bundle the cables with the clamper To tighten: To loosen: Pull Keep the Pull knob pressed. Note: Do not put the RF cable and the mains lead together to avoid noise. How to connect the Audio Output terminals COMPONENT AUDIO Amplifi...
Connections How to connect the HDMI Input terminal HDMI (High Defi nition Multi media Interface) is the fi rst all-digital consumer electronics A/V interface that supports uncompressed standard. The HDMI terminal supports both video and audio information. ∗ An HDMI-compliant device , such as a Set Top Box or DVD player with HDMI or DVI output terminal can be connected to the HDMI input terminal.
If there is a problem with your TV, please refer to the table below to determine the symptoms, then carry out the suggested check. If this does not solve the problem, please contact your local Panasonic dealer, quoting the model number and serial number (both found on the rear of the TV).
DVB Troubleshooting Some problems will only occur when viewing DVB channels. Due to the different techniques involved in digital reception, DVB signal quality can be poor even if you appear to have a strong signal when viewing analogue programmes. The DVB system requires a good quality signal to provide the best picture. When viewing analogue pictures, interference such as signal refl...
Input signal that can be displayed Applicable input signal for Component (Y, P ) and HDMI ( ∗ Mark) Horizontal Vertical Signal name Component HDMI frequency (kHz) frequency (Hz) ∗ ∗ 525 (480) / 60i 15.73 59.94 525 (480) / 60p 31.47 59.94 ∗...
Specifi cations TX-32LXD55F Power Source AC 220-240 V, 50 / 60 Hz Power Consumption Average use : 168 W Standby condition : 0.4 W (Without Tuner Lock On) 18 W (With Tuner Lock On) Wide XGA (1,366 × 768 pixels)
Page 40
Trade Mark of the DVB Digital Video Broadcasting Project (1991 to 1996) TX-32LXD55F Declaration of Conformity No 3587, 31st May 2005 Customer’s Record The model number and serial number of this product can be found on its rear panel. You should note this serial number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of your purchase to aid in identifi...