Siemens OpenAir GIB Series Technical Instructions page 4

Technical Instructions
Document No. 155-177P25
June 22, 2015
Accessories
Page 4
NOTE: Neither the auxiliary switches nor the feedback potentiometer can be added in
the field. Order the product number that includes these options.
Figure 1. Floor Mount Kit.
Figure 2. Frame Mount Kit.
Figure 3. Crank Arm Kit.
Figure 4. Crank Arm Kit with Mounting
Bracket.
OpenAir™ GBB/GIB Series Non-spring Return, 24 Vac, Floating Control
ASK71.1U: Allows foot mounting of the
OpenAir actuators. Kit should be used for
in-the-air stream applications or anywhere
a foot-mounted actuator can be mounted.
Kit contains:
• Crank arm for changing angular
rotation into a linear stroke
• Support bearing ring to minimize side
loading on the actuator's output
bearing
• Mounting bracket
• Required mounting fasteners
ASK71.2U: Allows mounting of OpenAir
actuators directly to a damper frame. Kit
should be used with louvers and vents and
in applications where use of the floor
mount kit is not possible.
Kit contains:
• Crank arm to change the angular
rotation into a linear stroke
• Support bearing ring to minimize side
loading on the actuator's output
bearing
• Mounting bracket
• Required mounting fasteners
ASK71.3: Allows a direct-coupled actuator
to provide an auxiliary linear drive. Kit can
be used to simultaneously drive a set of
opposing or adjacent dampers with a
single actuator.
Kit contains:
• Crank arm to attach to the splined
hub of the shaft adapter
• Required mounting fasteners
ASK71.4: Allows economical mounting of
an OpenAir actuator to a variety of
surfaces. Kit should be used in
applications where the actuator can be
rigidly surface mounted and a linear stroke
output is required. Kit contains:
• Crank arm to attach to the splined
hub of the shaft adapter
• Mounting bracket
• Required mounting fasteners
Siemens Industry, Inc.