Control Identification & Safety Signs - Snapper EICFR5505BV Safety Instructions & Operator's Manual

CONTROL IDENTIFICATION & SAFETY SIGNS
WARNING: Advises operator of safety procedures that
should be followed to prevent injury.
OPERATING INSTRUCTIONS:
instructions. 1) Handle position. 2) Depth of tilling. 3)
Engine starting procedure. 4) Tiller clutch engagement.
WARNING: To avoid fuel leakage and
FIRE HAZARD, fuel must be drained
from tank before standing tiller on end.
EUROPEAN PERFORMANCE:
Maximum level of vibration measured at the operators
hand is 22.0 m/sec2.
Describes operating
5
STARTING PROCEDURE:
procedure for starting tiller.
WARNING: Advises operator of the danger
of the rotating tines.
WARNING: Warns
operator's manual and observe all labels
and safety instructions before operating
tiller.
SOUND POWER LEVEL
Describes
operator to read