Control Identification & Safety Sign - Snapper EICFR5004B Safety Instructions & Operator's Manual

CONTROL IDENTIFICATION & SAFETY SIGNS
WARNING: Advises operator of safety procedures that
should be followed to prevent injury.
OPERATING INSTRUCTIONS:
instructions. 1) Handle position. 2) Depth of tilling. 3)
Engine starting procedure. 4) Tiller clutch engagement.
WARNING: Warns of possible fire hazard
from leaking fuel. Also warns of potential
engine damage from leaking fuel.
EUROPEAN PERFORMANCE:
Maximum level of vibration measured at the operators hand is 22.0 m/sec2.
Describes operating
5
STARTING PROCEDURE:
procedure for starting tiller.
WARNING: Advises operator of the danger
of the rotating tines.
WARNING: Warns
operator's manual and observe all labels
and safety instructions before operating
tiller.
Describes
operator to read