Advertisement
Safety Terms and Symbols
The following terms may appear on the instrument:
DANGER: Direct injury or hazard may occur.
WARNING: Potential injury or hazard may occur.
CAUTION: Potential damage to instrument/property may occur.
The following symbols may appear on the instrument:
WARNING
CAUTION
Risk of
Risk of
electric
injury or
shock or
damage.
burn
Refer to
manual.
Operating Environment
emperature: 0 °C to 40 °C
T
Relative Humidity: 5 to 90% RH at ≤ 30 °C
Altitude: ≤ 3048 m at ≤ 30 °C
Use indoors only.
Pollution degree 2. Use in an operating environment where
normally only dry, non-conductive pollution occurs. Temporary
conductivity caused by condensation should be expected.
AC Power
Input Voltage & Frequency: 100-120 V at 400 Hz or
Automatic AC selection.
Power Consumption: 50 W maximum
Mains Supply Connector: CAT II per IEC/EN 61010-1:2010,
instrument intended to be supplied from the building wiring at
utilization points (socket outlets and similar).
2 Quick Start
Earth
Protective
Ground
Conductor
Terminal
Terminal
100-240 V at 50/60 Hz
ON/
Frame or
Chassis
Standby
Terminal
Power
Alternating
Current
Advertisement
