Advertisement
4. Channel Parameters Area
Displays the current selected channel's load and output settings.
Load ----Value of the output load, as selected by the user.
•
After choosing the parameter to highlight it, use the softkeys, number keys or
knob to change the parameter value.
•
High Impedance: display HiZ.
•
Load: display impedance value (the default is 50 Ω and the range is 50 Ω to
100 kΩ).
Note: This setting does not actually change the instrument's output load impedance
of 50Ω but rather is used to maintain amplitude accuracy into different load values.
Output ----Channel output state.
After touching this area of the screen or pressing corresponding channel
output control port, you can turn on/off the current channel.
5. LAN Status Icon
The generator will show different prompt messages based on the current network
status.
This diagram indicates LAN connection is successful.
This diagram indicates there is no LAN connection or LAN connection is
unsuccessful.
6. Menu
Touch here for the menu corresponding to the displayed function. For example, the
screen image shows the parameters of "AM modulation". After touching the
menu on the touch screen to choose the corresponding parameter, use number keys
or knob to change the parameter value.
7. Modulation Parameters Area
Shows the parameters of the current modulation function. After touching this area of
the screen or pressing corresponding menu, use number keys or the knob to change
the parameter value.
12 Quick Start
Advertisement
