Specifications - Sharp FP-FM40Y Operation Manual

SYMPTOM
GLUE SHEET Lamp is fl ashing
No mosquitoes are collected on the
Glue Sheet.
When the adhesive remains on
clothes, skin, fl oor, etc.
SLEEP lamp is fl ashing.

SPECIFICATIONS

Power supply
Fan
Speed
Operation
Recommended Room Size
High density Plasmacluster ion recommended room size
Cord Length
Dimensions
Weight
*1 Size of a room which is appropriate for operating the unit at maximum fan speed.
• It indicates the space where a certain amount of dust particles can be removed in 30 minutes
(JEM1467).
*2 Size of a room in which approximately 7000 ions can be measured per cubic centimeter in the
center of the room (at a height of approximately 1.2 meters from the fl oor) when the product is
placed next to a wall and run at the MED operation position.
Standby Power
OM_FP-FM40Y_ID-EN.indb Sec1:17 OM_FP-FM40Y_ID-EN.indb Sec1:17
• Peel off one of layer or exchange the whole Glue Sheet set
when all layers have been used.
Then, press the Mosquito Catcher button for 3 sec.
• Try relocating the unit.
• Peel off one of layer or exchange the whole Glue Sheet set.
• Wipe with cooking oil, then wash with soap and water.
• Fan motor error. Turn the power OFF. Wait one minute, and
then turn the power ON.
Fan Speed Adjustment
Rated Power
Fan Speed
In order to operate the electrical circuits while the power plug is inserted in the
wall outlet, this product consumes about 1.0W of standby power.
For energy saving, unplug the power cord when the unit is not in use.
REMEDY (not a malfunction)
220 V
MAX
33W
3
240m /hour 150m
391mm(W)x281mm(D)x540mm(H)
E-17
50 Hz
MED SLEEP
14W 3.7~6.2W
3 3
/hour 48~90m /hour
~30m 2 *1
2 *2
~23m
2.0m
5.8kg
7/27/2558 BE 5:51 PM 7/27/2558 BE 5:51 PM