Sharp FP-FM40Y Operation Manual page 31

ADJUSTMENT OF SENSOR DETECTION SENSITIVITY
Set to "Low" if the DUST SIGN is constantly red to reduce sensitivity, and set to "High" if the DUST
SIGN is constantly green to increase sensitivity.
1
(with the unit OFF)
2
3
AUTO RESTART
If the unit is unplugged or if there is a power failure, the unit will resume operation with the previous
settings after power is restored.
ON
(with the unit OFF)
(simultaneously for more than 3 sec.)
OM_FP-FM40Y_ID-EN.indb Sec1:11 OM_FP-FM40Y_ID-EN.indb Sec1:11
more than 3 sec.
If the ,
for 10 seconds, the setting is completed.
NOTE
High
• If the power OFF Button is not
pushed within 8 seconds of
adjusting sensor sensitivity,
the setting will be saved
Standard
automatically.
• The sensor sensitivity setting
will be saved even if the unit is
unplugged.
Low
OFF
(with the unit OFF)
, lamp Lights up
E-11
7/27/2558 BE 5:51 PM 7/27/2558 BE 5:51 PM