Reading Out The Data Storage Unit; General Information; File; Languages - Siemens Sinorix al-deco STD Operating Handbook

4

Reading out the data storage unit

4.1

General information

TM
The Sinorix
recordings possible. In addition, all data regarding the extinguisher system installed on a machine
tool in another object is read into the interface by inputting with a PC. Both the extinguisher system
data and the data of the protected object are recorded.
The input process starts with the preparation of the system at the manufacturer's site, and is
continued up to the commissioning, service and refilling.
All incidents will be recorded in a directory that can process up to 1,000 incidents.
The input processes are carried out using a password management. All persons who have been
authorised by altrade ag to carry out entries must be in possession of a password, which will
communicated to them personally by the company management of Siemens.
For the read-out of the data by the user, a software is installed on the CD-Rom (user handbook) a
software that has to be loaded onto a PC by the user when necessary.
This software can also be downloaded over the Internet using the user password.
The interface must be connected to the PC via the USB interface.
The following description explains the entries of the user interface in detail, and explains how to
handle the input process.
It assumes that the corresponding software has been loaded onto a PC and that this is connected to
the interface by means of a USB cable.
4.2

File

Login:
In order to initialise the contact with the interface, a log-in is required, and a password is necessary
in order to complete the log-in.
This password will be provided by the manufacturer. The password is unique, and, if it is forgotten,
a new password will have to be generated by the manufacturer.

Click on Login, and wait until the new window appears with the password

Enter the user (family name) and the corresponding password (6 alphanumeric characters).

Click on OK
You are now logged in and should see your name on the top information bar.
The forms that can be printed out are listed below.
When you want to exit the program, use „Close", but note that all data that has not been saved will
thereby be lost.
4.3

Languages

The language can be selected in the Language field.
All screens then appear in the selected language.
The entries to the fields takes no account of the selected language.
Building Technologies
Fire Safety
al-deco STD Com-interface has an electronic storage unit that makes various
Reading out the data storage unit
A54475-A1-A2_EN_05.docx
17
01.2018